-
1. Who is responsible for providing PPE — the employer or the worker?
-
2. How do I choose the right Portwest hi vis trousers without wasting money?
-
3. How do I actually use the Portwest catalogue efficiently?
-
4. Do commercial kitchens really need a Class K fire extinguisher?
-
5. Is a glass pool fence legally required, and does it meet code?
-
6. What's the biggest mistake people make with last-minute PPE orders?
I spend most of my working days triaging safety gear orders that absolutely, positively have to arrive by yesterday. In my role coordinating emergency PPE supply for industrial and construction clients, I've handled 500+ rush jobs in the past four years — everything from a 48-hour hard hat order to a last-minute Class K extinguisher delivery that saved a restaurant's opening.
These are the six questions I get asked most often. Straight answers below.
1. Who is responsible for providing PPE — the employer or the worker?
The short answer: the employer, almost always.
Under OSHA's PPE standard (29 CFR 1910.132), U.S. employers must provide required personal protective equipment at no cost to workers. There are narrow exceptions — non-specialty safety-toe footwear and ordinary clothing are two common ones — but if you require an employee to wear it for protection on the job, you're responsible for paying for it.
This matters because I've had buyers ask if they can pass PPE costs to contractors in the purchase order. The answer is basically never. "But it's their safety," someone said to me last year. Right — and it's your legal exposure.
In the UK, the logic is similar: the Personal Protective Equipment at Work Regulations 1992 require employers to provide suitable PPE free of charge. Different jurisdiction, same principle.
2. How do I choose the right Portwest hi vis trousers without wasting money?
Start with your standard requirement, not the style. In the U.S., high-visibility clothing is typically rated under ANSI/ISEA 107. Class 2 covers most general site work; Class 3 is for higher-risk environments like highway work where visibility from greater distance matters.
Then — and this is where people get burned — check the details that don't show up in a thumbnail photo:
- Is the reflective tape stitched on all sides (or just spot-attached)?
- What's the fabric weight? Cheap poly-cotton blends pill badly after three washes.
- Does the tape stay reflective after repeated laundering?
Why does this matter? Because Portwest hi vis trousers vary widely across their range. I had a client buy 200 pairs from a budget reseller. Three washes later, the tape was peeling. They saved $300 upfront and spent $1,800 re-buying. I still kick myself for not warning them sooner.
The first thing a client or inspector sees is the gear your people are wearing. Cutting corners on the fabric sends a message — just not the one you want.
3. How do I actually use the Portwest catalogue efficiently?
Don't read it cover to cover. Use the Portwest catalogue like a reference manual, in this order:
- Identify the standard class you need (ANSI/ISEA 107 Class 2/3, or EN ISO 20471 in Europe)
- Filter by fabric weight and garment type
- Check bulk pricing for your size breakdown
The catalogue groups products by line (PW, FR, etc.), which helps. But last spring I was hunting for a specific high-vis trouser for a 48-hour turnaround and discovered the product codes across lines look deceptively similar. Mental note: always double-check the code before you submit the order.
A 40-page flip-through takes maybe 10 minutes when you know what standard you're searching for. It takes an hour when you don't.
4. Do commercial kitchens really need a Class K fire extinguisher?
Yes — and the requirement is more specific than most people realize.
Per NFPA 10 (Standard for Portable Fire Extinguishers), commercial cooking operations involving vegetable or animal oils and fats — think deep fryers, griddles, woks — should have a Class K extinguisher. These use wet chemical agents designed to saponify (i.e., turn into soap) the burning oil. Water-based extinguishers don't work on kitchen fires, and standard ABC dry chemical can knock down the flame momentarily while the oil reignites.
In March 2024, a restaurant manager called us 36 hours before final inspection. They'd failed because the only extinguisher on-site was an ABC type. We sourced a 6-liter Class K wet chemical unit from a local distributor: $180 in rush fees on top of $400 base cost. Delivered on time. The alternative was a delayed opening — $4,000 per day in lost revenue. Costly lesson about a $580 fix.
5. Is a glass pool fence legally required, and does it meet code?
It depends on where you are, but the short version: if you have a swimming pool, some kind of barrier is almost always required by local building code — the typical standard being the International Residential Code (IRC), which specifies a minimum 48-inch (1.2 m) barrier height with a self-closing, self-latching gate.
Glass pool fences can meet that requirement where local code allows, provided the panels use safety glazing (tempered or laminated glass meeting ANSI Z97.1 or 16 CFR 1201). Standard 10mm tempered glass is common for residential applications.
Here's the part clients forget: insurance. Even if your jurisdiction permits a specific fence configuration, your insurer may impose stricter requirements. I worked with a property manager in 2024 who installed a glass fence that passed local inspection — but after a claim, their insurer flagged that the glass didn't meet the safety glazing standard in their policy rider. Replacement came out of pocket.
So the legal requirement and the insurance requirement aren't always the same thing. Check both.
6. What's the biggest mistake people make with last-minute PPE orders?
Assuming that rush shipping is always the right call.
Last quarter alone, we processed 47 rush orders with a 95% on-time rate. But not every one of those should have been rushed. Our internal rule: if standard delivery is 5 days and your deadline is 10 days out, rushing is just lighting money on fire. If the deadline is in 3 days, the math changes.
We didn't have a formal approval process for rush fees until 2023 — and it cost us. An unauthorized $350 rush fee showed up on an invoice for an order that had 8 days of standard delivery time available. The requester panicked. Nobody checked the calendar. We implemented a two-person verification step after that.
One more thing: if you're sourcing a mix of PPE and facility safety items (extinguishers, barriers, signage), the last-minute scramble tends to expose every gap in your ordering plan at once. Speed, quality, price — pick two. But if the item is safety-critical, pick quality and speed, then recover the cost elsewhere.
That's what 500+ emergency orders will teach you.