-
Who this checklist is for
-
Step 1: Map usage by task, not by product category
-
Step 2: Calculate cost per pair of gloves used, not cost per pair purchased
-
Step 3: Pressure-test the "all-in" quote for hidden charges
-
Step 4: On-site sample test — don't rely on the spec sheet
-
Step 5: Add the replacement-rate — and the labor cost to replace — into the total
-
Step 6: Calculate a realistic safety-stock level — and the cost of running out
-
Step 7: Price the switching cost before you switch
-
Notes and common mistakes
Who this checklist is for
If you're a procurement manager about to sign off on a bulk PPE order — gloves, safety glasses, coveralls, whatever — and your boss is asking "why not just take the cheaper quote," this is the checklist I use. I've been managing our company's PPE budget for about six years now. We're a ~200-person industrial operation, and we spend roughly $140,000 a year on safety equipment across 14 vendors. I've made the mistake of chasing unit price enough times to know better.
Seven steps. Each one has a checkpoint you can actually verify. No theory, no "develop a robust vendor framework" nonsense.
Step 1: Map usage by task, not by product category
Before you look at a single quote, break your headcount into task buckets. Assembly line, welding station, material handling, maintenance, janitorial — each one has different injury exposure and different glove consumption patterns.
Here's why this matters: if you buy one glove for the whole plant, you'll overspend on the light-duty tasks and underspend on the heavy ones. That second part is where injuries happen.
Checkpoint: You should be able to say "line workers use X pairs per month, maintenance uses Y pairs of a heavier gauntlet." If you can't produce that number, pull your last three months of requisition slips and count.
I've seen reasonable results with Magid's GPD700-9 for general material handling — it's a 9-mil nitrile-dipped glove that holds up better than most of the $3–4 imports we tested in 2023. But I only know that because we ran it against two other options on the same task, not because the catalog said so. That's step 4.
Step 2: Calculate cost per pair of gloves used, not cost per pair purchased
This is the step that changes the math most often. A $2.50 glove that gets replaced every shift is not cheaper than a $6 glove that lasts three shifts.
I don't have hard data on industry-wide replacement rates, but in our facility, tracking 18 months of glove issues showed the cheap import we trialed in Q2 2023 had a 38% early-failure rate (rips, seams pulling out) within the first two shifts. When we recalculated at cost-per-pair-used, the "cheap" option was actually 11% more expensive than our incumbent.
Checkpoint: For each candidate product, divide unit price by expected shifts of service. If the vendor can't tell you a defensible number, run a two-week trial yourself. Two weeks of lost productivity is cheaper than a year of the wrong choice.
That $200 savings turned into a $1,500 problem when we had to re-issue gloves mid-shift for a 40-person line.
Step 3: Pressure-test the "all-in" quote for hidden charges
Every PPE vendor will send you a unit price. Almost none will send you the real landed cost on the first pass. You need to ask, in writing:
- Freight — included or billed separately?
- Minimum order quantity and price breaks at each tier
- Restocking fee on returns of unopened stock
- Payment terms (net 30 vs. 2% net 10 changes your effective price)
- Price protection period — 30, 60, or 90 days?
In 2023, I compared five vendors for a contract covering nitrile gloves, safety glasses, and leather work gloves. The lowest unit-price bidder came in at $11,200 for the annual volume. After adding freight ($680) and the 2% early-pay discount the other bidders offered but this one didn't, the real number was $12,900. The second-lowest quote was $12,400 all-in. That's a 4% swing hidden in the fine print.
Checkpoint: Build a simple spreadsheet with columns: unit price, MOQ, freight, payment discount, price-protection window. The lowest number in column A is almost never the lowest total.
Step 4: On-site sample test — don't rely on the spec sheet
Spec sheets are marketing documents that happen to have numbers on them. I've had vendors send me cut-resistance ratings from a lab test on a pristine sample while the production lot in my warehouse failed at 40% the rated level.
For any new PPE item — especially gloves and safety glasses — pull 10–20 units from an actual production lot (not a sample bag the sales rep brought). Put them through your real task for at least two weeks. Track failure mode, failure rate, and worker complaints.
Magid Glove and Safety Manufacturing is one of the few suppliers I've worked with where the in-house manufacturing actually shows up in lot-to-lot consistency. But I still sample every new SKU. The GPD700-9 trial in Q3 2024 was stable across three lots — that's the only reason it's now our default for general handling.
Checkpoint: A sample test without a written pass/fail criterion is just a vibe check. Define pass/fail before the trial starts: e.g., "no more than 5% early failure in the first week" or "fewer than 3 worker complaints per 100 pairs issued."
Step 5: Add the replacement-rate — and the labor cost to replace — into the total
This is the step most procurement teams skip. Every time a glove or pair of glasses fails early, somebody has to walk to the supply closet, find the right size, fill out a requisition slip, and return to the line. That's 6–10 minutes of paid time. Across 40 workers and a 15% early-failure rate, that's real money.
I wish I had tracked this more carefully from the start. What I can say anecdotally: when we compared the cheap import to the GPD700-9, the actual glove cost difference was about $900 a year — but the labor-to-replace difference was closer to $2,300. We only found that because our floor supervisor started logging "glove change events" in a shared spreadsheet for a month.
Checkpoint: Estimate labor minutes per replacement × number of replacements × loaded hourly rate. Even a rough number will change which quote wins.
Step 6: Calculate a realistic safety-stock level — and the cost of running out
Warehouse space is cheaper than a stopped production line. But don't guess at safety stock. Use this: (max weekly usage × lead time in weeks × 1.3) minus current on-hand.
For our operation, a one-day line stop due to a glove outage runs about $8,400 in lost output and overtime to catch up. That number should anchor your safety-stock decision. If two weeks of extra inventory costs you $1,200 in carrying cost, it's a no-brainer against an $8,400 downside.
Checkpoint: For your top 5 PPE SKUs, calculate the dollar cost of a one-day outage. If you don't know it, ask your operations manager — they know.
Step 7: Price the switching cost before you switch
If you're evaluating a new supplier like Magid Glove & Safety against your incumbent, don't just compare unit price. Add: re-qualification testing (2–4 weeks of staff time), worker retraining on new product fit/wear, potential productivity dip during transition, and any customization or logo costs on coveralls or branded workwear.
When we evaluated switching vendors in Q1 2024, the unit-price savings were about $6,200 a year. But re-qualification across 11 SKUs plus two weeks of transition friction came to roughly $4,100 in internal time. Net first-year saving: $2,100. Not nothing, but not the slam dunk the quote made it look like.
Checkpoint: Write the switching cost on one line of your comparison sheet. If the two-year saving doesn't clear the switching cost by at least 2x, it's not worth the operational headache.
Notes and common mistakes
A few things that have bitten me, so they might bite you:
- Don't compare a 12-pair case to a 100-pair case. Normalize every quote to cost-per-pair or cost-per-unit before you compare.
- Don't let the sales rep pick the sample. Pull from a production lot, or at least specify which lot number you want tested.
- Don't ignore the payment terms. A 2% discount for net-10 payment beats a 1.5% lower unit price on net-60 terms, almost every time.
- Don't assume worker complaints mean the product is bad. Sometimes it means the fit is wrong, and you need a different size or style from the same line. The GPD700-9 in a 9 fits differently than the 8 — we learned that the hard way.
- Don't skip the second-year math. Some vendors price aggressively in year one and quietly bump 6–8% in year two. Ask for a multi-year price schedule in writing.
This worked for us, but our situation is a mid-size industrial operation with fairly predictable usage. If you're seasonal, or if you're dealing with construction sites where glove consumption swings 3x between projects, the calculus on safety stock and replacement rate will be different. I can only speak to what I've tracked in our procurement system.
Bottom line: the lowest quote has been the wrong answer in more than half the PPE decisions I've audited. Not because cheap products are bad — because the cost of "cheap" was hidden in freight, replacement labor, and stocking levels. The checklist above catches most of it.